2. Disconnect the carburetor electrical connector.
3. Disconnect drive parts:
A) connecting rod or accelerator cable;
b) (with manual air damper)
air damper cable;
V) (models with automatic transmission)
throttle control cable from an automatic transmission.
4. Disconnect the hoses (tubes) from the carburetor:
- A) fuel supply pipe;
- b) emission control hose (toxicity management) exhaust gases;
- V) carburetor ventilation control hose (float chamber).
Attention: before disconnecting the hoses, for ease of reassembly, attach a label to each hose indicating the location and purpose of the hose.
5. Disconnect the vacuum hose from the carburettor tube clamp.
6. Remove the carburetor by unscrewing the four fixing nuts.
Cover the intake manifold opening with a piece of cloth.