Vehicle check
1. Check tightness of pipe connections.
2. Use a leak detector to check the system for leaks.
Replacement of pipeline elements
1. Remove the refrigerant from the system.
2. Replace defective elements.
Attention: to prevent contamination from entering the system, immediately install plugs on the open ends of the pipes.
3. Tighten the connections.
Attention: Tighten the connections strictly in accordance with the given moments.
4. Evacuate and charge the system with refrigerant.
- The amount of refrigerant - 400 + 30 g
5. Check the system for leaks.
6. Check the operation of the air conditioner.
Evaporator check
1. Check the condition of the plates.
If the plates are clogged, blow them out with compressed air.
Note: Do not rinse the evaporator with water!
2. Check the condition of the fittings.
Repair if cracks or deformations are found.
