Sliding sunroof panel

Depending on the equipment, the car can be equipped with a manual or electric sliding sunroof panel. The electrically operated roof panel can be opened or closed manually.

Opening: press the SLIDE switch.

Closing: press the switch on the side opposite to SLIDE.

Movement is performed by pressing and holding the switch.

As a precaution, the roof panel stops at 3/4 of its travel when closing. To fully close, release and press the switch again.

The roof panel can be opened by simply pressing the UP switch. To close, press the switch on the side opposite UP.

To open the manual roof panel, pull the handle down while pressing one of the close buttons, then open the panel up until it locks. To close, pull the handle down while holding the panel with your hand, then close the handle with the palm of your hand.



To remove the removable roof panel, pull the handle down while pressing one of the close buttons. Remove the panel fastening spring levers from their sockets, squeezing them towards each other, and lift the panel (pic. 1.20). Release the auxiliary hook and twist the roof panel off the vehicle. Attach the roof panel to its designated location on the tailgate. To do this, unscrew the fixing paw on the tailgate, place the roof panel on supports and attach the paw to the panel handles (pic. 1.21). The front of the support is designed to install a large (front) roof panels, and the back for a small (rear) panels.




To install the removable roof panel, insert the hinges of the panel into the grooves provided for them, then tilt the panel down while holding it with your hand, and insert the spring levers into the slots. Press the handle of the roof panel and close it.