Series L
Install (see relevant sections).
1. Oil cooler.
2. Oil pump and oil pan.
3. Water pump.
4. injection pump.
5. Cylinder head.
6. Pulleys and timing belt.
7. Generator.
8. Back plate.
Tightening torque 12 Nm.
9. (For vehicles equipped with manual transmission). Flywheel installation.
A) Apply a light coat of engine oil to the threads and under the bolt heads
b) Install the flywheel on the crankshaft.
V) Install and evenly tighten the eight mounting bolts in several passes, in the sequence shown in the figure.
Tightening torque 123 Nm.
10. (For vehicles with automatic transmission). Install the torque converter drive clutch.
Tightening torque 98 Nm
11. (For vehicles equipped with manual transmission). Install the clutch disc and basket.
KZ series
12. Install (see relevant sections):
A) Block jet.
b) Engine mounts.
V) Water pipe and thermostat.
G) Oil cooler..
d) Oil pan and gear cover.
e) Oil temperature sensor.
and) injection pump.
h) Timing gear wheel.
And) Water pump.
To) Generator and generator bracket
l) cylinder head.
m) Timing belt and pulleys,
n) Back plate.
Bolt tightening torque 8 N.m
O) Flywheel (apply sealing adhesive to 2-3 threads, tighten the bolts crosswise to a torque of 145 N.m).
P) Clutch.