Attention! Perform fuel system decompression measures.
Work is carried out on a cold engine.
Carburetor engines
1. The filter is mounted below the fuel tank (in this case, raise the car), or in the engine compartment.
2. Loosen clamp.
3. Disconnect the hoses from the filter. Replace deformed hoses.
4. Take out the filter, install a new one, assemble in reverse order. Make sure that the arrow on the body is directed towards the hose from the carburetor. Start the engine and check for leaks.
Injection engines
5. Turn away bolts of unions, designate and disconnect hoses, turn away bolts of an arm and remove the filter.
6. Loosen the clamp, remove the filter and install a new one with the collar down. Further assembly is carried out in the reverse order. Replace fitting gaskets.