Car steering Toyota Land Cruiser 100

Removal and installation of a steering wheel
Warning! Before doing any work near the airbag unit, steering column or instrument panel, turn off the SRS to avoid injury if it is accidentally deployed (see Onboard electrical equipment ). SRS circuit wiring is easily...

Check of a condition, removal and installation of drafts of a steering drive
Examination Steering gear components installation details 1. Through the steering rods, the force is transmitted to the steered front wheels of the car (refer to illustration above). At the same time, the required...

Replacement of protective covers of assembly of the steering mechanism
1. Loosen the wheel nuts for the respective wheel. Jack up the front of the car and place it on jack stands. Remove the wheel. 2. Loosen the wheel nuts. Jack up the car and place it on jack stands. Remove wheels. 3....

Removal and installation of the steering mechanism
Warning! The car models covered in this manual are equipped with an additional security system (SRS). Before doing any work near the airbag unit, steering column or instrument panel, turn off the SRS to avoid injury if...

Removal and installation of the steering pump
Power steering pump location Power Steering Pump Assembly Components 1. Disconnect the negative cable from the battery. Attention! If the stereo system installed in the car is equipped with a security code, before...

Removing air from the hydraulic path of the power steering system
1. After performing any procedures related to disconnecting the lines of the power steering system, it is necessary to remove air from the power steering hydraulic path. Otherwise, the performance of the power steering...