Exterior mirrors
1. Remove the door trim panel as described in paragraph 15.
2. Disconnect the mirror electrical connector, and then remove the three mirror mounting bolts and disconnect the mirror from the vehicle (pic. 20.2).
Pic. 20.2. Disconnect the electrical connector (A), and then unscrew the mirror mounting bolts (IN)
3. Installation is performed in the reverse order of removal.
Interior mirror
4. Disconnect the mirror electrical connector (in the presence of).
5. On some models, the mirror can be removed by gently prying it between the mirror support and the groove at the base of the mirror post with the tip of a screwdriver wrapped in adhesive tape. At the base of the mirror there is a spring for fixing the rack to the mirror. To release the spring, insert a screwdriver about 18 mm. On some other models, the mirror can be removed by removing the set screw located at the base of the mirror post.
6. On models without a set screw, to install the mirror, reinstall the spring if it was previously removed. Insert the protrusion of the mirror stand into the support, pressing it down until the mirror locks into place.
7. If the base plate has come off the windshield, you can purchase an appropriate adhesive kit from an auto parts store to attach it. Follow the instructions included with the kit.