Engines 4A-FE and 7A-FE car Toyota Corona 9 (T190)

Description of 4A-FE and 7A-FE gasoline engines
4A-FE and 7A-FE engines in-line 4-cylinder, 16-valve with overhead camshafts. The displacement of the 4F-FE engine is 1.6 liters, and the 7A-FE engine is 1.8 liters. Cylinder numbering is from the crankshaft pulley. The...

Checking and adjusting thermal clearances in valves (4A-FE and 7A-FE)
Note: checking and adjusting the thermal clearances in the valves is carried out on a cold engine. 1. Remove the cylinder head cover following the sequence: A) Disconnect: alternator connector (1), generator wire (2),...

Timing belt (4A-FE and 7A-FE)
Removing and installing timing belt. 1 - crankshaft pulley; 2 - a bolt of fastening of a pulley of a cranked shaft (М3=118 Nm); 3 - V-belt drive generator and coolant pump; 4 - protective cover No. 1 of the timing belt;...

Cylinder head (4A-FE and 7A-FE) — withdrawal
Removing the cylinder head. 1 - drive belt for the generator and coolant pump; 2 - generator; 3 - alternator lock bolt (М3=18 Nm); 4 - alternator mounting bolt (М3=58 Nm); 5 - coolant pump drive pulley; 6 - cylinder...

Cylinder head (4A-FE and 7A-FE) — installation
Removing the cylinder head. 1 - drive belt for the generator and coolant pump; 2 - generator; 3 - alternator lock bolt (М3=18 Nm); 4 - alternator mounting bolt (М3=58 Nm); 5 - coolant pump drive pulley; 6 - cylinder...

Cylinder block (4A-FE and 7A-FE) — disassembly and assembly
Cylinder block. 1 - fitting bolt (М3=34 Nm); 2 - fitting gaskets; 3 - oil cooler oil pipe fitting; 4 - oil drain plug (М3=34 Nm); 5 - plug gasket; 6 - bolt (M3=4.9 Nm); 7 - oil pan (4A-FE); B - bolts (M3=9.3 Nm); 9 -...