Remove the lower right engine cover.
Pic. 2.323. Nut and bolt of fastening of a pulley of a drive of the compressor of a central air
Loosen nut A and bolt B (pic. 2.323).
Remove poly V-belt (air conditioning compressor drive from the crankshaft pulley).
Pic. 2.324. Turning the V-ribbed belt tensioner
Slowly turn the poly V-belt tensioner clockwise, then remove the belt (pic. 2.324).
Adjusting the tension of the V-ribbed belt No. 1 (air conditioning compressor drive from the crankshaft pulley)
Install poly V-belt.
Tighten bolt B, then adjust belt tension (pic. 2.323).
Tighten nut A.
Tightening torque: 39 Nm.
Install the lower right engine cover.
Install the #1 engine bottom shield.