| Pos. on the image | Tool | HAZET part no |
| 1 | Screwdriver set | 2272 |
| 2 | Set of interchangeable heads | |
| 3 | Bolt remover | 793/3 |
| 4 | Engine tester | BOSCH |
| 5 | stroboscope | BOSCH |
| 6 | Indicator lamp on diodes | |
| 7 | Styli 0.05-1.0mm | 2147 |
| 8 | Brake spring pliers | 797 |
| 9 | Impact extractor for valve stem seals | 791-2 |
| 10 | Carburetor mandrel | 4519-1 |
| 11 | Silencer pipe cutter | 2182 |
| 12 | Electrolyte Density Monitor | 802-1 |
| 13 | Compressed air adapter for replacing valve stem caps | 3428 |
| 14 | Hydraulic nut splitter | 846-22 |
| 15 | Oil filter wrench | 2172 |
| 16 | Protractor for controlled tightening of bolts, in particular cylinder head mounting | 6690 |
| 17 | Socket wrench set | 2100/7R |
| 18 | Brush for stripping terminals and poles | 802-4 |
| 19 | Valve lapping device | 795 |
| 20 | Finder magnet | 1976 |
| 21 | Torque wrench 20-200 Nm | 6122-1ST |
| 22 | Flat scraper for removing gasket residue | 824 |
| 23 | File for brake caliper 1968-1 | |
| 24 | Clutch mandrel diameter 15-19 mm | 2173/1 |
| 25 | Tie Rod End Puller | 779 |
| 26 | Pliers with insulation | 1862 |
| 27 | brass mandrel | |
| 28 | Steel brush for cleaning the brake caliper | 1968 |
| 31 | Splinter | 748Lgb-4 |
| 32 | Splinter | 748Lgb-6 |
| 33 | Compressometer | |
| 34 | Square adapter with 1/2" 1/4" | 958-2 |
| 36 | Stud remover | 845 |
| 37 | Double-ended open end ring wrench | 612S-10x11 |
| 38 | Brake piping wrench | 612S-12x14 |
| 39 | Impact remover for wiper arm | 1966-5 |
In addition to the one shown in the figure, the tool kit includes:
- spark plug wrench 20.8 mm - 2505-2
- candle wrench 16 mm (for 105 hp engines) - 2506
- 3/8 ratchet - 8816GK