Note: after any work related to the ingress of air into the clutch hydraulic system, bleed it.
Caution: Do not allow brake fluid to come into contact with painted surfaces. If brake fluid comes into contact with a painted surface, wash it off immediately.
1. Check the brake fluid level in the reservoir and add fluid if necessary.
2. Connect the vinyl tubing to the bleeder port. Insert the other end of the tube into a container half filled with brake fluid.
3. Bleeding the hydraulic clutch.
A) Gently depress the clutch pedal several times.
b) While holding the pedal down, loosen the bleeder screw. When the brake fluid stops coming out, tighten the fitting.
V) Repeat this procedure until no more air bubbles appear in the outgoing brake fluid.