Temporarily install 2 bolts.
Place a new lock plate and tighten the nut.
Tightening torque: 6.9 Nm.
Temporarily install the control shaft lever.
Pic. 3.92. Park/Neutral Switch Adjustment
Turn the lever counterclockwise until it stops, then turn the lever clockwise 2 clicks (pic. 3.92).
Remove the control shaft lever.
Pic. 3.93. Checking the Park/Neutral Position Switch
Align the notch with the neutral baseline (pic. 3.93).
While holding the switch in place, tighten the 2 mounting bolts.
Tightening torque: 5.4 Nm.
Pic. 3.94. Installing a nut with a lock plate
Using a screwdriver, install the nut with lock plate (pic. 3.94).