Regulator bolts and hoses (4 cylinder engine)
1. Pressure regulator; 2. Return hose; 3. Ring; 4. Control vacuum hose
Pressure regulator on V6 engine
1. Ring; 2. Pressure regulator; 3. Return hose; 4. Wiring harness
Examination
See subsection 5.3.3.
Replacement
1. Decompress and disconnect battery from ground.
2. Disconnect the vacuum hose from the regulator.
3. Disconnect the fuel return hose from the regulator by pinching it.
4. Turn away bolts of fastening of a regulator of pressure of fuel and remove a regulator.
5. Installation is carried out in the reverse order. Replace O-ring.