Car steering Toyota 4Runner 2 (N120)

Steering wheel — removal and installation
Removing Attention! Some cars are equipped with an airbag, which is located in a container in the center of the steering wheel. To prevent accidental activation of the system, turn the ignition switch to the Lock...

Tie rod end — removal and installation
Removing 1. Raise the front of the car and remove the wheels. 2. Loosen the tie rod lock nut. 3. Mark the position of the tip on the threaded part of the rod. 4. Loosen the ball joint castle nut. 5. Loosen the castle...

Steering gear cover — replacement
1. The cover is subject to replacement in case of violation of integrity. 2. Raise the front of the car and remove the wheel. 3. Remove the tie rod. 4. Remove the clamps and remove the cover. The outer collar of the...

Steering gear — removal and installation
Attention! On vehicles equipped with an airbag, steering wheel rotation after removal of the mechanism is not allowed in order to avoid damage to the airbag. Secure the steering wheel by wearing the seat belt and...

Power steering pump — removal and installation
4-cylinder power steering pump 1. Pump; 2. Vacuum hose; 3. Return hose; 4. Bolt of fastening of the fitting; 5. Pressure tube; 6. Gasket; 7. Belt; 8. Intermediate pulley; 9. Adjusting bolt V6 power steering pump 1....

Removing air from the power steering system
It is necessary to remove air from the hydraulic drive of the steering wheel during any disassembly of the line, regardless of the measures that have been taken to prevent air from entering. 1. Set the wheels to the...

Front wheel alignment
Front wheel alignment Camber = A - B D - angle of inclination of the axis of rotation Convergence = E - F G - toe angle The camber, the angle of inclination of the axis of rotation and the convergence of the wheels are...